reinforced Masonry Drill Bits (TS-DB-RI)
1.Material: 45#carbon steel, or 40Cr steel. Tip:YG8C |
2.Flute: R type, U type, L type, double flutes type etc. |
3.Surface: Nickelplated.(Bright finished,Zinc plated,Chorme plated,Nickle plated, Milled-sand blasted, Black&sliver,Titanium coated). |
4.Size: 3mm-40mm. Length:50mm-600mm. |
5.Process art: cold roll forged. milled. |
6.Standard: DIN8039 |
7.Masonry drill bit is used in building industry, installation, boring holes and so on.for drilling concrete,rock,masonry,marble and block etc. |
8.Special designed flute geometry remove dust from the hole quicker for fast drilling and long life. |
9. they are produced according to DIN / ANSI standards, we are also capable for OEM and ODM production. |
10. Set Diameter Size: 3mm-4mm-5mm-6mm-7mm-8mm-9mm-10mm. |
Diameter |
Flute |
Overall | Flute | Overall | Flute | Overall | Flute | Overall | Flute | Overall | Flute | Overall | |
Size | Size | Length | Length | Length | Length | Length | Length | Length | Length | Length | Length | Length | Length |
mm | Inch | mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | mm |
3 | 1/8" | 30 | 60 | ||||||||||
4 | 5/32 | 40 | 75 | ||||||||||
5 | 3/16" | 50 | 85 | 85 | 150 | ||||||||
6 | 15/64 | 60 | 100 | 85 | 150 | 135 | 200 | 200 | 300 | 300 | 400 | 450 | 600 |
6.5 | 1/4" | 60 | 100 | 85 | 150 | 135 | 200 | 200 | 300 | 300 | 400 | 450 | 600 |
7 | 9/32 | 60 | 100 | 85 | 150 | 135 | 200 | 200 | 300 | 300 | 400 | 450 | 600 |
8 | 5/16" | 80 | 120 | 85 | 150 | 135 | 200 | 200 | 300 | 300 | 400 | 450 | 600 |
9 | 11/32 | 80 | 120 | 85 | 150 | 135 | 200 | 200 | 300 | 300 | 400 | 450 | 600 |
10 | 3/8" | 80 | 120 | 85 | 150 | 135 | 200 | 200 | 300 | 300 | 400 | 450 | 600 |
11 | 7/16" | 85 | 150 | 135 | 200 | 200 | 300 | 300 | 400 | 450 | 600 | ||
12 | 15/32 | 85 | 150 | 135 | 200 | 200 | 300 | 300 | 400 | 450 | 600 | ||
13 | 1/2" | 95 | 150 | 135 | 200 | 200 | 300 | 300 | 400 | 450 | 600 | ||
14 | 9/16" | 95 | 150 | 135 | 200 | 200 | 300 | 300 | 400 | 450 | 600 | ||
15 | 19/32 | 95 | 150 | 135 | 200 | 200 | 300 | 300 | 400 | 450 | 600 | ||
16 | 5/8" | 95 | 150 | 135 | 200 | 200 | 300 | 300 | 400 | 450 | 600 | ||
17 | 11/16" | 95 | 150 | 135 | 200 | 200 | 300 | 300 | 400 | 450 | 600 | ||
18 | 11/16" | 105 | 160 | 135 | 200 | 200 | 300 | 300 | 400 | 450 | 600 | ||
19 | 3/4" | 105 | 160 | 135 | 200 | 200 | 300 | 300 | 400 | 450 | 600 | ||
20 | 25/32 | 105 | 160 | 135 | 200 | 200 | 300 | 300 | 400 | 450 | 600 | ||
22 | 7/8" | 105 | 160 | 135 | 200 | 200 | 300 | 300 | 400 | 450 | 600 | ||
24 | 15/16 | 105 | 160 | 135 | 200 | 200 | 300 | 300 | 400 | 450 | 600 | ||
25 | 1 | 105 | 160 | 135 | 200 | 200 | 300 | 300 | 400 | 450 | 600 |
控件[tem_25_34]渲染出错,Source:未将对象引用设置到对象的实例。
控件[tem_25_34]渲染出错,Source:未将对象引用设置到对象的实例。